The p-value for the z-score of the Mantel association parameter was inferred using 5,000 permutations as implemented in ZT software (Bonnet & Van der Peer, 2002 (Guillot & Rousset, 2013), the.

1. Zte Software
2. Zte Software Tool
3. Tz Software

1. ZOTAC - The original creators, pioneers, and manufacturer of Mini PCs and innovators of the fastest NVIDIA GeForce GTX Gaming Graphics Cards.
2. The p-value for the z-score of the Mantel association parameter was inferred using 5,000 permutations as implemented in ZT software (Bonnet & Van der Peer, 2002 (Guillot & Rousset, 2013), the.

Zeitronix Data Logger Software Setup:

1. Which version of the software should I use?

2. How do I run the install program?

3. What do I do if I don't have a serial port on my computer?

4. How do I setup the serial to USB adapter?

5. How do I setup the 'Com Port' in the software?

6. What if the screen does not show any data?

7. What should I do if the mouse jumps around when logging data?

1. Which version of the software should I use?

If you have purchased your Zt-2 system after 10/15/2009 or if you would like to log using more than one Zt-2 system then you must use the version 3 software. The version 3 software supports the new Model 2010 Zt-2 and all previous models of the Zt-2. To download the latest version 3 software please visit the main Zeitronix Data Logger software page.

If you have purchased your Zt-2 system before 10/15/2009 then you may also use either version 2.0.18 or 2.0.10. Version 2.0.10 is only recommended for very slow computers.

2. How do I run the install program?

If you are installing from a CD place the CD in the drive and the installation should start automatically. If it does not please double click the 'My Computer' icon. Double click the CD Rom drive which contains the installation disk. If installation does not begin you may run the 'Install.bat' file by double clicking on it. (For version 2 double click the program setup.exe).

If you have downloaded a .zip file from the Zeitronix website double click on the .zip file and extract the files to the desktop. You can do this by dragging the internal folder to your desktop. Next run the installation by double clicking on 'Install.bat'. (For ZDL version 2 double click the program setup.exe).

To install ZDL version 3 run the setup.exe program. Choose your language and the installation will begin.

3. What do I do if I don't have a serial port on my computer?

Automotive applications must contend with high electrical noise environment thus use of RS232 (serial) communication standard is preferable over home/office spec USB.
You can still find new 'industrial spec' laptops with serial (COM port) built in, but most new laptops are manufactured for office use and no longer supply a serial connector but using a Serial to USB adapter will provide the necessary connectivity without any negative effects on logging. Please see the next question for information on determining what virtual Com Port is being used by your Serial to USB adapter. These adapters can be found on our order page. No particular brand of Serial to USB adapter is required. If you have one already it will most certainly work for this application.

4. How do I setup the serial to USB adapter?

Without connecting the Zeitronix device please first follow the instructions which come with the Serial to USB adapter and install the drivers required by it. If you bought the Serial to USB adapter from Zeitronix you can download the drivers for it here.

5. How do I setup the 'Com Port' in the software?

ZDL v3.0.7 and later will automatically detect the COM port used and begin logging automatically. This feature can be disabled in the preferences. Please make sure the Zt-2 is powered and connected in order to be automatically detected.

Zte Software

ZDL v3.0.6 through ZDL v3.0.1
After running the software use the menu items 'Hardware' --> 'Connect to devices...'. Next press 'Scan for Zeitronix Devices'. The last line listed should give the com port number for any devices which were detected. For Device 1 change the 'Port' control to have the same com number as the one detected. Make sure all other devices are off. Press OK.
In 2.0.X versions of the software...
First run the software by double clicking the 'Zeitronix Data Logger' icon or choose it from the 'Start' menu under 'Programs --> Zeitronix --> Zeitronix Data Logger'. Next choose the 'Settings --> Plot Settings and Comm Port' from the menu. The first control called 'Comm Port' should be set as follows:

• For user with a Serial connection this should be set to Com1 or Com2.
• For users with a Serial to USB connection this value will be set to one of Com3 through Com8.

For a walk through of finding out what comm port to use on your system please see this page:

6. What if the screen does not show any data?

Once the Zeitronix unit receives power there is a warm up period for the sensor. After about 15 seconds data will begin streaming from the Zt2. This data will then be visible on the LCD display and available for logging through the serial cable.

Zte Software Tool

With the software running and setup according to question 5 above you can press the enter key to begin or end data logging.

If no data is logged and if you have an LCD or ZR-1/ZR-2 gauge then connect this gauge directly to the data port of the Zeitronix device. If this gauge does not light up then you unit is not powered up. Please check your power and ground connections.

If this works or you do not have a display connect the serial cable directly to the data port of the Zt-2. Double check your power and ground connections. Check the yellow wire of the signal harness for 5 Volt signal. If no signal is found please recheck your power (RED wire) for 12V power and double check that your ground connection (BLACK wire) is a clean good ground back. Please contact us at sales@zeitronix.com for additional assistance.

7. What should I do if the mouse jumps around when logging data?

Open the computer's 'Control Panel'. Use SystemHardwareDevice ManagerMice and other pointing devices path to obtain access to 'Microsoft Serial Ballpoint' device. Use 'Disable' via right mouse button menu to disable use of this device. Windows will no longer interpret the in coming serial data as a mouse.
The 'mouse' detection can also be avoided by plugging in the USB to serial adapter but do not power or do not connect the Zeitronix Wideband System. Start up the Zeitronix Data Logger software first and then finally connect or power up the Zt-2. This will prevent Windows from trying to use the Zeitronix Wideband data.

A Purpose-Built Approach to Hyperscale Platform Design

At scale, data center compute and storage hardware designed for specific applications can decrease total cost of ownership while optimizing performance and efficiency. With experience engineering solutions for many of the world’s largest data center customers, ZT Systems helps you realize these benefits with a superior combination of hyperscale-focused design expertise and rapid development capabilities. Our customer-collaborative approach ensures solutions that are truly tailored to your needs – and can be more quickly deployed into data centers to drive your business.

Solution architecture at ZT Systems begins with close collaboration to understand your unique priorities, application performance requirements, software stack, and physical data center characteristics. Factors influencing design range from target metrics such as cost per TB to power envelope, density, ease of serviceability, and supply chain diversification. We consider the broadest range of potential options and help you understand tradeoffs so that all design elements reflect your unique success criteria.

Tz Software

A pioneer of the “vanity-free” design approach made familiar by the Open Compute Project, ZT creates solutions that dispense with nonessential functionality and cosmetic elements. We leverage standard components where possible, and employ enclosure, board and rack level design capabilities as appropriate. We understand that “the rack is the SKU” in most hyperscale deployments, and our design and testing approach reflects this.

Capabilities:

• Compute and storage system architecture
• Platform development, test and validation
• Low power and ambient temperature solutions
• Rack, Chassis and circuit board design and prototyping
• Rack-level solution design and testing
• CFD Thermal modeling and simulation
• Rack and data center level thermal test chamber
• Open source server management experts